NEC PC-8201A - Page 178

Chapter 8
OPERATION
CHARACTER
CODE
FUNCTION
28
Moves the cursor one
character to the right
29
Moves the cursor one
character to the left
TP
39
Moves the cursor up one
line
31
Moves the cursor down
one line
These functions can be used when the PC-8201 is used as a terminal,
and it is highly interchangeable in comparison to ordinary terminals
because it has escape sequence in display operations.
An Escape Sequence involves the performance of a designated
function according to any array of letters which follow the Escape
code (ESC:27). It is input by pressing the Q Key and pressing a
letter key. The methods of using the Q and Keys are
entirely different, so do not confuse these special methods with
normal functions of the Q and Keys.
An Escape Sequence is also effective in BASIC.
The following Escape Sequences can be used with the PC-8201:
8-24