NEC PC-8201A - Page 66

Chapter 5
Commands
There are eight commands accessible from the MENU. They are
executed by pressing the corresponding Function Key. In most
cases, a message will appear on the bottom line of the screen
requesting a file name or other data to be entered when a command
is utilized.
For f.6 through f.10 Function Keys, use the Key
and the Function Keys simultaneously.
There are commands available in the TEXT and TELCOM
modes not described here. See Chapter 7 for TEXT
commands and Chapter 8 for TELCOM commands.
COMMAND DESCRIPTIONS
f.l/LOAD
FUNCTION
Loads a file from a specific external device and saves it in RAM.
DESCRIPTION
To use LOAD:
1. Press the f.1 Function Key.
2. When the following message appears, indicate which file is to be
loaded and specify from which external device it is being
loaded from:
Load from (file name)
3. When the "Save as" message appears, then indicate the name of
the file that is to be saved in RAM:
Save as (file name)
5-14