NEC PC-8201A - Page 67

Chaptei 5
When you input these file names make sure you follow the
naming conventions described in the section on files in
this chapter.
4.a) If you have indicated a file name that is new (different from
the names of any files presently stored in the RAM), the fol¬
lowing message will be displayed:
Ready?
The loading process will begin after the "Y" has been input.
b) If you have indicated a file name that is identical to another
file name presently stored in the RAM, the following
message will be displayed:
Sure?
If you type in "Y", the PC-8201 will begin to load and the
contents of the original file will be erased.
If you do not want to erase the contens of the original file input any
key except the "Y". The load command will then be cancelled,
preserving the contents of the original file.
LOAD command designates the specific device and file:
(external device name):(file name)
The name of the external device can be designated:
CAS: Cassette tape
COM:RS-232C
If the name of the external device is omitted, it will
default to "CAS:".
5-15