Section
1 Start Here 3
@
Slide the sheet guide toward the front.
Wben
you use continuous
Papers,
use the sheet guide in this position.
Sheet
Guide
INSTALLING THE RIBBON
A
black
nylon ribbon cartridge is sbipped with your Pinwriter.
Replace the ribbon when
print quality
becomes
faint.
WARNING:
Dont’t
tauch
the print
head
just after the
Printer
Operation.
0
Open the top
cover.
Be sure
the
canier is positioned at
the
Center
of
the
Printer.
Q
Set the
Paper
thickness setting lever to the forward position.
@
Turn the feed knob in the direction
of the
mow
to tighten the ribbon.
6
Slide the bar on the bottom of the ribbon cartridge undemeath the two hooks on
the
print
head carrier.
@
Gently press down on the top of the ribbon cartridge to
leck
it in place around
the print
head.
You may need to turn the ribbon feed knob
slightly
to align the
ribbon feed
slots
and pins.
Paper Thickness
Setting Lew
Ear
Hooks
To Next Page
Loading...