1
Start Here
Chis
section
provides
instructions
for
unpacking
and setting
up
the
Pinwriter
models
P2000
and
P2X.
UNPACKING
The shippinp carton contains the
parts
shown below. If any are damaged or
rnissing,
contact
your Printer
dealer.
NOTE:
Save
the
packing
material in
case
you ever need to
repack
and move the
Printer
to another location.
OPERATING REQUIREMENTS
Before you set
up-your
Printer,
be sure
that
you have an
effrcient
work
space.
You
should have a
good
Printer stand or similar type of
table.
In addition, you need the right
kind of environment to keep your equipment runninp well.
Set up your Printer in a location that is
0
weh-ventilated
Temperature
5”
to 38°C (41” to 100°F)
Relative humidity 30% to 85% (45% to 70%
witb
the optional sheet
feeder
installed)
To Next Page
Loading...