14 Section 3 Control Panel
Table 3-l
Font/Pitch Indication
Font Indication
I
MODE SELECT
‘itch Indication
Indication
MODE SELECT
On
On
On Off
Off On
Oft
Blink
Blink Off
On
Blink
Font
Courier
Prestige Elite
Quick Gothic
Draft Gothic
Helvetica
Times P.S.
Indication
MODE
SELECT
On
On
On Off
Off
On
Off Blink
Blink Off’
On
Blink
Pitch
10 cpi
12 cpi
15 cpi
17 cpi
20 cpi
Proportional space’
Blink On
Bold
P.S.
l
Displayed when Times P.S. or Bold P.S. is
selected.
NOTES:
1.
When pressing MODE under the tear off function, the printer feeds paper
to the first print position and then enters the font/pitch selection mode.
2.
When the printer error (see Table
5-1)
occurs during the font/pitch
selection mode, the printer displays errors after completion of the font/pitch
selection mode.
3.
When the printer receives the print data during the
fontlpitch
selection mode,
the printer prints data after completion of the font/pitch selection mode.
4.
Turning off the printer during the font/pitch selection mode cancels any
modified settings.
MEMORY SWITCH MENU MODE
The memory switches control your printer’s menu mode settings. Before using the
printer, check that the memory switches are set for your particular needs.
This section provides you with instructions for entering the memory switch menu mode
and the function of each mode, a listing of factory settings, and a description of each
setting. The memory switch menu mode is devided into two
mjor
modes; option setting
mode and normal setting mode. In the option setting mode, you should instruct the
printer that the removable tractor is installed as push tractor or pull tractor, or the optional
sheet feeder is installed in the printer. In the normal setting mode, you can change the
various internal printer settings.
To Next Page
Loading...