NEC Pinwriter P2000/P2X - 3 Control Panel; BUTTONS AND INDICATORS

I
I
12
3
Control Panel
This section explains how to use the numerous features accessed through
the P2OOOIP2X control panel. You will learn the function of each button
and how to access printer operations.
BUTTONS AND INDICATORS
The buttons and lights on the control panel allow you to easily control the printer and
observe its status.
Printed Static Display
SELECT tight
MODEllight 1
FEED/LOAD Button
MODE Button
I
MODE Light
Together with the SELECT light, lights or blinks to display the currently selected font or pitch
during font/pitch selection mode.
SELECT Light
0 Displays the printer state.
0
0 Lights when the printer is in the online state
and paper is loaded in the printer
CJ Goes off when the printer is in the offline o
state or the printer is out of paper.
Blinks once a second when the printer is
out of paper and print data remains in the
printer buffer.
Blinks twice a second or blinks alternately
with MODE light when a printer problem
occurs (see Section 5).
MODE Button
Press and hold this button while turning on
the printer to enter the menu mode.
0 Press to enter the font/pitch selection mode 0
(see Selecring the Font and Pitch).
Q Press to resume printing after loading paper 0
when the SELECT light blinks once a
second (paper empty).
Press to stop the self-test printing (press
once to resume printing).