NEC SL1100 - Active Call List; Active Call List Format; Table 6-1 Call State Colors

6 - 4 Desktop Application Startup
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 SL1100
The operation of each of these functions is further described in Section 1
Toolbar Functions on page 3-1.
1.3 Active Call List
The Active Call List displays all of the calls that are currently being handled by
the application. The list includes calls that are in the following states:
 Ringing
 Connected
 Held
1.3.1 Active Call List Format
The active call entry that is displayed on the top of the list is always
the connected (active) call.
Each entry in the active call list includes the following information,
based upon the current state of the call:

Line/Trunk Identifier
 Connection Status
 Timer displaying time in current state
 Calling Party/Called Party Identification
 User-defined notes
 DNIS information when provided.
The color of the frame for each entry in the active call list also
indicates the state of the call. The following table shows the colors
that represent each call state.
Calls are automatically removed from the active call list when they are
disconnected.
Do Not Disturb Unpark
Forward Calls Voice Mail
Group Call Pickup
Table 6-1 Call State Colors
State Frame Color
Active/Connected Green
Ringing Red
Held Yellow