NEC SL1100 - Figure 2-23 Setting Playback Properties; Table 2-2 Default Audio Settings; To Change the Audio Properties for the Playback Device

SL1100 Issue 1.0
Desktop Suite 2 - 25
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 5 CHANGING AUDIO SETTINGS IN WINDOWS 7
(Only applies when using Windows 7 or WIndows Vista)
Successful operation of the softphone within Windows 7 requires that the audio
properties be set to a supported format. The default settings for the audio device must
be set within the range of values shown in the following table.
5.1 To change the Audio Properties for the Playback device:
1.
On the Windows Control Panel, select the Sound option.
2. On the Playback tab, select the device to be changed and press the Properties
button.
Table 2-2 Default Audio Settings
Sampling frequency (Hz) 8000 / 16000 / 32000 / 48000
Quantization bit 16 bit
Channel all values supported
Figure 2-23 Setting Playback Properties