NEC SL1100 - Add Note; Figure 3-14 Add Note Screen

SL1100 Issue 1.0
Desktop Suite 3 - 13
___________________________________________________________________________________
___________________________________________________________________________________
1.19 Add Note
The Add Note function can be used to annotate the active call. When the Add
Note function is selected, the following dialog will be displayed (refer to Figure
3-14 Add Note Screen).
 The Note field allows the user to enter a text message that will be saved
with the call record.
 Selecting the OK button will close the Add Note dialog and attach the note
to the call record.
 Selecting the Cancel button will close the Add Note dialog without
changing the note field.
 The Clear function will erase the contents from the Note field on the Add
Note form.
 If a note is attached to a call record, selecting the Add Note function will
allow the user to edit the existing note.
 When a Note is attached to a call record, the Note will be shown within the
active call entry.
 When a Note is attached to a call record, the Note will be shown in the Call
Log entry for that call.
Figure 3-14 Add Note Screen