NEC SL2100 - Page 25

SL2100 GETTING STARTED GUIDE
21
IP7[ ]-008U-[ ]1
This 008U-C1 board is installed on the
Universal slot in the IP7[ ]-4KSU-C1
chassis and provides a total of eight
analog extension ports. Either the
analog trunk daughter board (3COIDB)
or ISDN PRI/T1/E1 daughter board
(1PRIDB) can be mounted on this board.
IP7WW-000U-C1
This is an expansion board for mounting
a 3COIDB-C1 or 1PRIDB daughter
board, and is installed on the Universal
slot in the IP7[ ]-4KSU-C1 chassis.
IP7WW-3COIDB-C1
This 3COIDB-C1 daughter board
provides three analog trunks and is
mounted on the 082U-B1, 008U-C1 or
000U-C1 board. A total of four 3COIDB
boards can be mounted per Chassis.
IP7WW-1PRIDB-C1
The 1PRIDB-C1 daughter board is
mounted on the 082U-B1, 008U-C1 or
000U-C1 board and installed on the
Universal slot in the IP7[ ]-4KSU-C1
chassis and provides either an ISDN
Primary Rate Interface, T1 Interface or
E1 interface. A total of three 1PRIDBs
can be installed per system or one
1PRIDB per Chassis.
IP7WW-VOIPDB-C1
The VOIPDB-C1 daughter board
provides the RTP/RTCP voice
processing function. This board is
mounted onto the CPU-C1 board
(VOIPDB slot) of the controlling chassis.
IP7WW-SDVMS-C1
The SDVMS-C1 (VRS/VM (InMail)) SD
cards are for storage purposes (1GB
(approximately 15 hours recording) and
mount onto the CPU-C1 board (SD card
slot).
IP7WW-SDVML-C1
The SDVML-C1 (VRS/VM (InMail)) SD
cards are for storage purposes (4GB
(approximately 120 hours recording) and
mount onto the CPU-C1 board (SD card
slot).
IP7WW-12TXH-B1 TEL (BK)
The 12TXH-B1 TEL is a 2-wire digital
multiline telephone.