NEC SL2100 - 8.4 Mailbox Security Code; 8.5 Listen to Messages Left in Your Mailbox

SL2100 GETTING STARTED GUIDE
54
2.6.3
Program 22-04-01
The telephones are placed into Ring Group(IRG’s).
2.6.3.1
Default Setting
 Telephone Number 101-108 are the member of IRG number 1.
No.
Operation
Display Shows;
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this operation.
2
Dial 22 04 01.
Change the Incoming Ring Number (1-50), if required.
3
Press DND key to move the cursor to Member Number.
Change the Member Number (01-48), if requred.
4
Press Hold key to move the cursor to Extension Number. Change the
Extension Number, if required.
5
Press Hold key to confirm the entry and step to the next option.
6
When you are done, press Mute key several times to return to
Programming Mode.
7
Press Speaker key to save changes and exit from Programming Mode.
2.6.4
Program 20-07-01
Turn on the Day/Night mode Option.
2.6.4.1
Default Setting
 Day/Night modes can not be changed using telephones.
No.
Operation
Display Shows;
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this operation.
2 Dial 20 07 01. Change the Feature Class (1-15), if required.
(Default: all telephones are assigned to Class 1.)
3
Press DND key to move the cursor to Switch Manual Night Service.
Change the Switch Manual Night Service (0:disable/1:enable), if
requred.
4
Press Hold key to confirm the entry and step to the next option.
5
When you are done, press Mute key several times to return to
Programming Mode.
6 Press Speaker key to save changes and exit from Programming Mode.
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
22-04-01 INC Group1
Memb.01=101
← - + →
22-04-01 INC Group1
Memb.01=101
← - + →
22-04-01 INC Group1
Memb.01=101
← - + →
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
20-07-01 FCTN Cls1
SW Manual NTservice1:On
← - + →
20-07-01 FCTN Cls1
SW Manual NTservice1:On
← - + →