NEC SL2100 - Program 15-01-01; Outgoing Exchange Line Access; Program 15-06-01

SL2100 GETTING STARTED GUIDE
60
2.9.1 Program 15-01-01
Use this program to add or edit an extension name.
2.9.1.1 Default Setting
The default setting is not assigned to the extension name for all extensions.
No.
Operation
Display Shows;
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2
Dial 15 01 01. Enter the Extension Number and press DND key to step
to the next option.
(e.g. Extension Number: 101 )
3 Enter Extension Name, (e.g. Extension Name: David) using the
keypad.
Up to 12 characters can be entered.
4 Press Hold key to confirm the entry and step to the next option.
5 When you are done, press Mute key several times to return to
Programming Mode.
6
Press Speaker key to save changes and exit from Programming
Mode.
2.10 Outgoing Exchange Line Access
This feature allows you to dedicate an exchange line to specific equipment. You may want to change this setting
if you want a dedicated exchange line for one of the telephones (e.g.,FAX). Each telephone is assigned a trunk
access map (TAM) number.The TAM number is then given the access properties for each of the exchange lines.
2.10.1 Program 15-06-01
Use this program to give the telephones a trunk access map (TAM) number. There are 128 TAM numbers
available. You can specify a different TAM number for each day/night mode. See changing the Telephone
Ringing Assignment for the modes you may be using.
2.10.1.1 Default Setting
All telephones have a default setting of trunk access map (TAM) number 1.
No.
Operation
Display Shows;
1 Log into Programming Mode.
If you you have already logged into Pogramming Mode, skip this
operation.
2
Dial 15 06 01. Enter the Extension Number and press DND key to step
to the Next option.
(e.g. Extension Number: 101 )
3
Enter the TAM Number (1-128) for each mode (1-8); you can overwrite
the current entry.
4 Press Hold key to confirm the entry and step to the next option.
5 When you are done, press Mute key several times to return to
Programming Mode.
6
Press Speaker key to save changes and exit if you are finished.
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
15-01-01 TEL101
Ext Name -
← →
15-01-01 TEL101
Ext Name - David
← →
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
15-06-01 TEL101
Mode1 Acc-Map 1
← - + →