NEC SV8100 - Page 48

AudioCodes Mediant E-SBC 48 Document #: LTRT-12530
NEC SV8100 IP-PBX & BroadCloud SIP Trunk
4. To configure rule to route calls from BroadCloud SIP Trunk to IP-PBX:
a. Click Add.
b. Click the Rule tab, and then configure the parameters as follows:
Parameter Value
Index
2
Name
ITSP to IP-PBX (arbitrary descriptive
name)
Source IP Group
BroadCloud
Figure 4-25: Configuring IP-to-IP Routing Rule for ITSP to IP-PBX – Rule tab