Configuration Note 4. Configuring AudioCodes E-SBC
Version 7.0 53 AudioCodes Mediant E-SBC
4. Click the Action tab, and then configure the parameters as follows:
Parameter Value
Manipulated Item
Destination URI
Remove From Left
2
Prefix to Add
+
Figure 4-29: Configuring IP-to-IP Outbound Manipulation Rule - Action Tab
5. Click Submit.
The figure below shows an example of configured IP-to-IP outbound manipulation rules for
calls between IP-PBX IP Group and BroadCloud SIP Trunk IP Group:
Figure 4-30: Example of Configured IP-to-IP Outbound Manipulation Rules
To Next Page
Loading...
