NEC UNIVERGE GT890 - Add Group

184
2. Select “Send” from the menu then choose the Bluetooth device that you want to share the contact
with.
 Sharing a batch of contacts:
1. Select the contacts as described in Select Contacts.
2. Press on to share the selected contacts via Bluetooth
Add Group
Open Contacts and tap on to access “Group”. To add a new group, tap on and name the new
group.
Figure 234: GT890 Contacts - Add New Group
Add contacts to Group
To add contacts to a group, tap on the group then tap on , check the contacts to be added to the
group and press .
Note:
 Users could also select a group for the contact when adding or editing the contact.
 This content does not any affect to ST500.