71
Originating a call
Note:
If you enter pause (,) as the calling number, the number before the pause will be sent as the called
number and the number after the pause will be sent as DTMF. After entering numbers, long-tap [*]
on the dial pad to enter a pause (,). A pause (,) cannot be entered if a number has not been entered.
While ST500 screen is displayed, before originating a call if you off-hook the handset, you will hear
dial tone from the receiver. In addition, ST500 receive calls even when dial tone is on. If there is an
incoming call, the ring tone will be heard and the dial tone will stop.
Dial a Number Directly
Note:
If you need prefix numbers (for example, when making an international call), Dial Prefix feature can
simplify the operation. See Dial prefix feature.
1. Tap icon.
- The Call screen is displayed.
Figure 59: To originate a call from the Call screen.
To Next Page
Loading...
