NEC UNIVERGE GT890 - Getting to Know ST500; Screen names and features

42
Tap on to access more symbols.
Figure 34: English Keyboard - More Symbols
Note:
 To configure keyboard and input options, go to the application menuSettingsBasic
Language & KeyboardKeyboard and Input Methods.
 Users could touch and press the key on the keyboard for about 2 seconds to input the alternative
character. For example, touch and press the "+" key for about 2 seconds can get the selection "±".
Use the Message Waiting Indicator
The GT890 message waiting indicator LED is on the upper right corner of the device. It could notify the
users with different messages and status of the phone. Please refer to the status description below. The
priority for the LED indicator is from high to low in the following table. Certain items can be switched
on/off of the LED. See To switch on/off of the Message Waiting Indicator.
Table 12: GT890 MWI LED Status
Color
LED Status
Description
Fast Flashing
Incoming call.
Flashing
Missed call (s), New voicemail (s).
Solid
High memory usage, Maximum contact storage, Network
disconnect.
Fast Flashing
Upgrading.
Solid
The LCD is off.
OFF
OFF
Normal.