NEC UNIVERGE GT890 - Turn On;Off Wi-Fi; Connect to Wi-Fi Networks

217
Turn On/Off Wi-Fi
1. Go to the application menuSettingsNetworkWi-Fi.
2. Check or uncheck the option for Wi-Fi.
Or, users could open the top status bar and tap on Wi-Fi icon to turn it on/off.
Connect to Wi-Fi Networks
1. Once Wi-Fi is turned on, the phone will automatically start the scanning within the range.
2. Go to the application menuSettingsNetworkWi-Fi.
3. A list of Wi-Fi networks will be displayed as scanning result. Tap on the SSID and enter the correct
password information to connect to the selected Wi-Fi network.
4. The phone will start connecting to the Wi-Fi. The status bar will show Wi-Fi signal strength.
5. Once it is added and the password is saved, the phone will automatically connect to it when the SSID
is within the range.
Figure 282: GT890 Connect to Wi-Fi
Access Point 1