NEC UNIVERGE GT890 - EHS Headset; USB Headset

225
EHS Headset
The phone supports normal RJ9 headset and EHS headset. To use Poly EHS headset:
1. Go to the application menuSettingsBasicPeripherals: and enable option “Plug in RJ9/EHS
headset”.
2. Change the Headset Type to Plantronics EHS under the Web GUISystem
SettingsPreferencesAudio Control. After saving the setting change, please reboot the phone.
3. Connect EHS Headset to the GT890. Insert headset connector into the RJ9 headset port on the back
of GT890.
Figure 290: EHS headset
USB Headset
The phone supports USB Headsets, once a headset plugged, it will be detected automatically, and the
following icon will be shown on the top right of the status bar, this means a USB headset is connected.