NEC Univerge SV8100 - SECTION 3 PROGRAM 15 EXTENSION, BASIC SETUP

Issue 7.00
InMail System Guide 3 - 375
SECTION 3 PROGRAM 15 EXTENSION, BASIC SETUP
Program 15-01 Basic Extension Data Set Up
Description
Program 15-01 Basic Extension Data Setup defines the basic settings for each
extension.
Use 15-01-01
Extension Name to enter an extension name for Directory Dialing. You
can also enter an extension name from the telephone.
.
For information on the other 15-01 Basic Extension Data Setup options, refer to the SV8100
Programming Manual.
Options
 15-01-01 Extension Name
Enter the name for each extension, using up to 12 characters, A~Z, upper
and lower case letters. Do not use non-alpha characters. To separate a first
name from a last name, enter a space or comma as a delimiter. You can
enter names in any of the following formats:
 First
 Last
 First (space) Last
 Last (space) First
You can also use Name Programming from the telephone to enter
extension names (Speaker + 800 or PRG 15-07/SC 851 + 55).
. For help with programming names, see Keys for Entering Names on page 3-376.
. See Directory Dialing on page 2-113.