– 49 –
CHAPTER 5 Various Settings of PCPro
Note 1: The entered characters are displayed as “*”.
Note 2: When registering a user account, the user account of the system administrator must be registered on each
Data Memory. When user account is not registered on the selected Data Memory, the system administrator
is selected as the login grade automatically, and it cannot be changed.
Note 3: The Cancel button is displayed only when the [Add] button is clicked. However, it is not displayed if there
is no user account registered.
STEP 2: Click the Setup button after editing the item
(4) - (8). The registered user ID is added to the user
account list.
STEP 3: Click [Close] button in the [User Account Setting] screen.
No. Item Description
(6) Password
Enter the password of the user account. Note 1
A maximum of eight characters can be entered. It is unavailable if a space is en-
tered.
(7) Password Confirmation Enter the password of the user account again. Note 1
(8) Login Grade
Select the login grade of the user account from the following. Note 2
• System Administrator
• Login grade registered on the Data Memory selected. (1-16)
(9) [Setup] button Click to setup the edited user account.
(10) [Cancel] button Note 3 Click to cancel the edit.
(11) [Close] button Click to close the [User Account Setting] screen.
To Next Page
Loading...
