– 52 –
CHAPTER 5 Various Settings of PCPro
Note 1: If the login grade already registered is selected, “exist” is displayed in Data column. If not registered, the
login grade is displayed in grayout status.
Note 2: If the login grade already registered is selected, the status on the check box of each executable command
is displayed as registered. If not registered, all the checkbox status are displayed as OFF.
Note 3: Each commands are grouped for each features. When the check box for any feature is checked, all the com-
mand related to the feature is allowed to execute. If the check box on the “All Command” is checked, all
the commands are allowed to execute.
STEP 2: Edit the login grade and click the Setup button. “exist” is displayed on the Data column of the login
grade being selected from the login grade list.
STEP 3: Click [Close] button in the [Login Grade Setting] screen.
The logig grade has now been set.
No. Item Description
(1) Login Grade List
The available login grade (1-16) are displayed for each Data Memory. Note 1
When the login grade is selected, the status on the check boxes for executable com-
mands are changed, and they can be edited. Note 2
(2) Remove Click to delete the login grade selected from the Login Grade List.
(3) Executable Command Set ON to the check box of the command that you want to allow to execute. Note 3
(4) [Setup] button Click to setup the edited login grade.
(5) [Restore] button
Click to restore the status on the check box for executable command to the former
status.
(6) [Close] button Click to close the [Login Grade Setting] screen.
To Next Page
Loading...
