NEC Univerge SV9100

Issue 2.0
5-30 Hardware Specifications
SECTION 8 AUDIBLE AND VISUAL INDICATION
8.1 Tone Patterns
Table 5-21 Tone Patterns lists the frequency and the pattern for the tones. Tones
are used to inform UNIVERGE SV9100 station users of system functions such as
dial tone, busy tone, or ringback tone.
8.2 Multiline Terminal LED Flash Patterns
The UNIVERGE SV9100 system has several colored LEDs installed. Green is
used primarily for I-Use conditions and for outside calls. Red is used primarily for
Other Use conditions and internal calls.
The Large LED provides the user a variety of programmable colors and
preferences. Refer to Table 5-22 Multiline Terminal LED Flash Pattern.
Table 5-21 Tone Patterns
System Tone
(Fixed)
Frequency (Hz)
(Fixed)
Intermit
(Default)
Cycle
Busy Tone 480/620 60 IPM
Call Waiting Tone 440 60 IPM
Second Dial Tone 350/440 120 IPM
Howler Tone
2400 Modulation
(16 Hz)
Continuous
Internal Dial Tone 350/440 Continuous
Internal Ringback Tone 440/480
1 sec On
2 sec Off
LCR Dial Tone 440 Continuous
Reorder Tone 480/620 120 IPM
Service Set Tone 440 Continuous
Special Dial Tone 440 240 IPM
0.5 sec
0.5 sec
0.5 sec
0.5 sec
0.25 sec
0.25 sec
1 sec
2 sec
0.25 sec
0.25 sec
0.125 sec
0.125 sec