Chapter 3 - 10 Charts and Illustrations
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0
April 2005
0
Placing a call using ARS or
Trunk Group Routing
Automatic Route
Selection Trunk Group
Routing
*02
700 + code + 0 Using Dial Block
Toll Restriction, Dial
Block
-
701 + code + 0 A supervisor using Dial Block
Toll Restriction, Dial
Block
-
702 + Group number (01-32)
Setting Automatic Transfer
Setup for each extension
group
Transfer -
703 + Group number (01-32)
Cancelling Automatic
Transfer Setup
Transfer -
704 + Group number (01-32) +
mode + extension
Setting the destination for
Automatic Transfer Setup for
each extension group
Transfer -
705 + Group number (01-32)
Setting Delayed Transfer for
each extension group (on no
answer)
Transfer -
706 + Group number (01-32) Cancelling Delayed Transfer Transfer -
707 + Group number (01-32)
Setting up DND for each
extension group
Transfer -
708 + Group number (01-32)
Cancelling DND for each
extension group
Transfer -
711
SLT Listening to the General
Message
Voice Response
System (VRS)
-
712 + 3 to erase, 5 to listen or 7 to
record
Recording, listening to or
erasing the General Message
Voice Response
System (VRS)
-
716 + 3 to erase, 5 to listen or 7 to
record
Recording, listening to or
erasing a VRS Message
Voice Response
System (VRS)
-
718
Night Mode Switching for
other group
Night Answer -
720
Common Cancelling Service
Code
721
Print the SMDR Extension
Accumulated printout
Station Message Detail
Recording (SMDR)
-
722
Print the SMDR Group
Accumulated printout
Station Message Detail
Recording (SMDR)
-
723
Print the SMDR Account
Code Accumulated printout
Station Message Detail
Recording (SMDR)
-
726
Leaving a message at an
extension, without first calling
that extension
Message Waiting -
Table 2: Service Codes by Number
Dial this Service Code…
1
When you are... For this feature...
Also see
Function Key...
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle CALL key first).
To Next Page
Loading...
