NEC Xen Topaz - Page 19

XEN Topaz NEC Business Solutions Ltd
System Hardware Manual Chapter 3 - 11
Doc. No. 8846 - Release 2.0 April 2005
745 + Trunk No.
(01~51)
Trunk Port Disable (1)
Disable (0) Enable
-
750 + 0 (install) or 1 (remove)
Logging in (0) or logging out
(1) for your Department
Calling Group
Department Calling -
754
Enabling Conversation
Record at an SLT set
Voice Mail -
763 + 6-digit code + line + phone
number
Overriding Toll Restriction Toll Restriction -
777
Changing the COS of another
extension. Must be allowed in
Program 20-13-28.
Class of Service -
778
Displaying the language of
the system.
Maintenance -
725 Live MonitoringVoice Mail Voice Mail -
771
Charge Cost Display by the
supervisor.
Station Message Detail
Recording
-
774
Entry Credit for Toll
Restriction
Toll Restriction -
780
Change to Station Group All
Ring
Ring Groups -
800 + extension # + enter name +
HOLD
Programming extension
names
Name Storing 55
801 + zone (1-9 or 01-32) 801 +
zone (0 or 00)
Making an Internal Zone
Page
Making an All Call Internal
Page
Paging, Internal
21 + zone
22
802 + Doorphone (1-6) Placing a call to a Doorphone Doorphone -
803 + zone (1-6)
803 + zone (0)
Making an External Zone
page
Making an External
Zone page
Making an External All
Call page
19 + zone
20
804 + trunk group (1-9 or 01-51)
Placing an outside call over a
trunk group
Central Office Calls,
Placing
*02 + group
807
Overriding Do Not Disturb or
Call Forwarding
Call Forwarding Do Not
Disturb
37
808
Stepping through a
Department Group
Department Step
Calling
36
809
Sending a Call Waiting
indication to a busy extension
Call Waiting 33
Table 2: Service Codes by Number
Dial this Service Code…
1
When you are... For this feature...
Also see
Function Key...
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle CALL key first).