NEC Xen Topaz - Page 25

XEN Topaz NEC Business Solutions Ltd
System Hardware Manual Chapter 3 - 17
Doc. No. 8846 - Release 2.0 April 2005
Call Forwarding
Off-Premise
713 + 6 + Trunk access code
+ Outside number, or
713 + 6 + Hold + Hang up to
cancel
Forwarding your calls to
an off-premise
telephone number
17
Call Forwarding, Off- Premise
Doorphone
822
Calling off-premise with
a Doorphone
54
Call Forwarding/Do Not Disturb
Override
807
Overriding an
extension's Call
Forward or DND
setting.
37
Call Forwarding with Follow Me
888 + 3 + Destination + Type
(2-4)
Activating Call Forward
Follow Me at the
destination extension
16
Call Waiting / Camp On 894
Splitting (switching)
between calls on an
SLT
-
Callback / Camp On / Trunk
Queuing
0
Camping On or leaving
a Callback for a busy
extension or trunk
35
870
Cancelling a Callback
request
-
899
Testing Callback
operation for SLT
-
Central Office Calls, Answering /
Hold
872
Using Universal Answer
to pick up a call ringing
over the paging system
-
772 + Line number (01-51)
Answering a call on a
specific trunk
-
799 + 1 (set) or 0 (cancel)
Changing the ability for
a second call with DID/
DISA/DIL
-
Central Office Calls, Placing
805 + 01-51
Placing a call over a
specific trunk
*01 + trunk (01-51)
804 + trunk group (1-9 or 01-
51)
Placing an outside call
over a trunk group
*02 + group
Class of Service 777
Changing the COS of
another extension.
Must be allowed in
Program 20-13-28.
-
Conference
Hookflash + 826 + extension
+ hookflash twice
Activating Conference
from a Single Line set
1016
Table 3: Service Codes by Feature
For this feature...
1
Dial this Service Code...
1
When you are...
Also see
Function Key...
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle CALL key first).