NEC Xen Topaz - Page 26

Chapter 3 - 18 Charts and Illustrations
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
Department Calling
750 + 0 (install) or
1 (remove)
Logging in (0) or
logging out (1) for your
Department Calling
Group
46
Department Step
Calling
#
Step Calling through a
Department Group
36
Dial Pad Confirmation Tone 824
Enabling/disabling Dial
Pad Confirmation Tone
-
Directed Call Pickup 815 + ext.
Picking up a call ringing
or waiting at an
extension
-
Do Not Disturb
847 + 0 (Cancel)
1 (Trunk calls)
2 (Paging, ICM, Call
Forwards, and Transfers)
3 (All calls)
4 (Call Forwards)
Activating Do Not
Disturb
-
Doorphone 802 + Doorphone (1-6)
Placing a call to a
Doorphone
-
Flash 806
Flashing a trunk from
an SLT
-
Forced Trunk
Disconnect
724 (after 805 + 01-51 +
busy)
Disconnecting a call in
progress on a trunk
-
Group Call Pickup
867
Picking up a call ringing
an extension in your
own pickup group
(except Ring Group
calls)
24
868 + pickup group (1-9 or
01-32)
Answering a call ringing
a phone in another
pickup group
26 + group
869
Answering a call ringing
a phone in another
pickup group if you
don't know the group's
number (except Ring
Group calls)
25
Table 3: Service Codes by Feature
For this feature...
1
Dial this Service Code...
1
When you are...
Also see
Function Key...
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle CALL key first).