Chapter 4 - 348 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0
April 2005
Single Line Telephone
1. Press SPK key or lift handset.
2. Dial 884 (default).
3. Enter mailbox number (and password).
4. Dial service code 2#.
5. Dial abbreviated broadcast list number (0-9).
6. Record Message.
7. Hang up.
Transferring a Message to a Broadcast List:
1. After the message playback has ended,
2. Dial 28#.
3. Dial abbreviated broadcast list number (0-9).
4. Dial #.
5. Dial 0# to accept.
6. Hang up.
Voice Mail Access from Outside Line:
1. Dial in to listen to your personal greeting.
2. After your greeting has ended, two short beeps will be heard.
3. Enter your password (if set).
4. Dial #.
5. You now have access to the service code options for your mailbox,
(e.g. dial 1# to listen to your messages).
Note: Mailbox password must be set before external access is allowed
Personal Answering Machine Emulation
(External Voice Mail Integration Only - Not available with DSPDB Voice Mail)
System Phone
1. Press the Personal Answering Machine Emulation key (SC 851:16).
2. Dial 1 to Set, or 0 to Cancel.
3. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
4. Press SPK to hang up.
Single Line Telephone
1. Press SPK key or lift handset.
2. Dial 888 (Call Forward to Station).
3. Dial 1 to Set, or 0 to Cancel.
4. Dial Call Forwarding type:
5. 2 = All calls
3 = Outside calls only
To Next Page
Loading...
