NEC Xen Topaz - Page 357

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 349
Doc. No. 8846 - Release 2.0 April 2005
4 = Intercom calls only
6. Hang up.
Personal Automated Attendant
There are 3 greeting messages available for each mailbox. Service codes are
available to record, play or erase each individual message.
Setting Personal Automated Attendant Mode
Multiline Telephone:
1. Press Automated Attendant key (SC 851:70) repeatedly until the desired call forward
setting is made - All, No Answer, Busy, Busy/No Answer, Cancel.
-OR-
1. Lift Handset and dial voice mail access code 884 (default).
2. Enter mailbox number and password (if set).
3. Dial the required service code:
67#, to toggle Forward Busy/No Answer on and off (default: off).
62#, to toggle Forward All on and off (default: off).
4. Hang up.
Single Line Telephone:
1. Lift Handset and dial voice mail access code 884 (default).
2. Enter password (if set). Mailbox number is not required.
3. Dial the required service code:
67#, to toggle Forward Busy/No Answer on and off (default: off).
62#, to toggle Forward All on and off (default: off).
4. Hang up.
Enabling Single Digit Dialling During Voice Mail Message
Multiline Telephone:
1. Press Voice Mail Access Key (SC 851:67).
2. Enter password (if set).
3. Dial service code 68# to toggle facility on and off (default: off).
4. Hang up.
-OR-
1. Lift Handset and dial voice mail access code 884 (default).
2. Enter mailbox number and password (if set).
3. Dial service code 68# to toggle facility on and off (default: off).
4. Hang up.
Single Line Telephone:
1. Lift Handset and dial voice mail access code 884 (default).
2. Enter password (if set). Mailbox number is not required.
3. Dial service code 68# to toggle facility on and off (default: off).