10
© by NECTA VENDING SOLUTIONS SpA 0012 Colibrì
CLEANING THE CUP SHIFT ARM
The cup shift arm must be cleaned periodically by remov-
ing it from the machine. In order to remove it, completely
undo the fastening knurled nut (see Fig. 3).
When reinstalling it, ensure that the spacer washer is
positioned correctly.
WEEKLY CLEANING OF THE COFFEE
UNIT
Every time coffee is refilled, or at least once a week, any
powder residue should be removed from the external parts
of the coffee unit, particularly from the coffee funnel area
(see Fig. 17).
SUSPENDING FROM USE
If for any reason the machine is switched off for a period
exceeding the use-by date of the products, the following
will be necessary:
- completely empty the containers and thoroughly wash
them with the chlorine-based detergents used to clean
the mixers.
- completely empty the coffee doser unit by dispensing
coffee until the empty condition is indicated.
- completely empty the hydraulic system.
To Next Page
Loading...
