NEFFOS C7s - 3.5 Share your mobile data with other devices

20Chapter 3 . Network and Share
• On the Home screen, go to Tools > Downloads > > Recent.
Manage paired devices
On the Currently connected list, tap a paired device to configure followings things:
• Rename paired devices: Tap and then enter the new name in the name field and tap RENAME
to save your configuration.
• Manage permissions: Toggle Internet access and Contact sharing switches to set your internet
and contact permissions.
• Unpair Bluetooth devices: Tap FORGET.
Rename your device
1. Tap and hold Bluetooth in the Quick Settings Panel to enter the Bluetooth screen and tap
Connection preferences > Bluetooth > Device name.
2. Edit the device name and tap RENAME to complete the configuration.
3. 5 Share your mobile data with other devices
You can use WLAN hotspot, USB cable, or Bluetooth to share your mobile data with other devices
(such as phones, tablets, or computers).
Use WLAN hotspot
Set up a portable WLAN hotspot to share your phone’s mobile internet with other devices.
Compared with Bluetooth tethering, the portable WLAN hotspot feature offers quicker, longer
range connections, but power consumption is higher.
Note: Your device can’t access the internet using WLAN when your Portable WLAN hotspot is turned on.
• Open WLAN hotsopt
1. On the Home screen, tap Settings > Network & internet > Hotspot & tethering > WLAN
hotspot.
2. Turn on the switch. After enabling your personal WLAN hotspot, will be displayed in the
status bar.
• Configure WLAN hotspot
On the WLAN hotspot screen, you can configure following settings. After finishing, tap SAVE.
• Change the hotspot name: Enter your hotspot name that is easier to remember and tap OK.
By default, the network name is your phone model.
• Change the security setting: Your phone uses WPA2 PSK encryption by default. Other
devices will require a password to connect to the hotspot. If you choose None, other devices
will not require a password to connect to your hotspot.
• Configure the password: Tap Hotspot password and enter the new password.
• Turn off hotspot automatically: Turn on the switch and if no devices are connected, the
WLAN hotspot will be turned off.
• Select a AP band: Your device only supports 2.4 GHz Band.
• Configure the maximum number of connections: Change the maximum number of
connections. Your phone will allow up to 10 users to connect to the hotspot.
• WPS connect: Select WPS mode.
• Hotspot control mode: Select hotspot control mode.
• Manage users
On WLAN hotspot screen, you can view and manage the connected and blocked users. You
can tap Manually Add WhiteList Device to add users in white list.