PROGRAMMING INSTRUCTIONS - PROGRAM MODE
Set Time of Day
Turn the large dial to the TIME position. Press SELECT to select between
hours, minutes, and 12/24 hour mode. Press ADJUST to scroll to the correct
time or adjust between 12/24 mode. ‘A.M.’ will not appear on the LCD when in
A.M. mode; ‘P.M.’ will appear on the LCD when in P.M. mode.
NOTE: In 24 hour mode, calendar is in D/M/Y format instead of M/D/Y
Set Today’s Date and Current Day of the Week
Turn the large dial to the DATE position. Press SELECT keys to select between
day, month and year positions. Press ADJUST keys to scroll to the current
date. The correct day of the week will automatically show on LCD screen when
today’s date is adjusted. The EZ Pro
™
Jr. controller is leap year compliant.
Select Zones and Set Their Run Times
A zone run time determines the duration a zone will run. Turn the large dial to the
ZONE/RUN TIME position. Turn PROGRAM dial to choose program A, B or C.
Press SELECT to choose the zone you want for the selected program (A, B, or C).
With the zone number displayed on the LCD, press ADJUST to adjust the RUN
TIME for that zone. RUN TIMES can be set from 1 minute to 1 hour 59 minutes.
Continue selecting zones and adjusting their run times until you have all the
zones you want in the selected program.
After the last zone and before the first zone, a RUN TIME summation is provided.
This is useful for determining the total run time for a program. The LCD displays
the letters “ALL” and a total RUN TIME is displayed. The time displayed is a
summation of all the RUN TIMES for the selected program (100% water budget).
(ex. A program has a run time of 5 minutes on zone 1; 12 minutes on zone 2; and
6 minutes on zone 4. The display at this position displays ALL and a run time of
23 minutes).
14
To Next Page
Loading...
Need help?
General
