PROGRAMMING INSTRUCTIONS - PROGRAM MODE
NOTE: Programming a WATER DAYS schedule deletes any other schedule
for the selected program.
Set Odd/Even Day Scheduling Option
Turn the large dial to the SCHEDULE position. The last scheduling option
chosen for the current program appears on the LCD. To set either an ODD or
an EVEN schedule press the SELECT button till an arrow appears on the LCD
next to the appropriate schedule (ODD or EVEN). A DATE must be set for
odd/even watering). The SELECT buttons act as toggle keys and will toggle
between odd or even.
NOTE: Programming an ODD/EVEN schedule deletes any other schedule for
the selected program.
Set Interval Scheduling Option
Turn the large dial to the SCHEDULE position. The last scheduling option
chosen for the current program appears on the LCD. Press SELECT to scroll to
the interval days position. An arrow will appear on the LCD next to INT
(Interval). Use the ADJUST to choose interval days between watering (1-30).
The date displayed is day one of the interval schedule. (Today’s date if one has
been set). To change day 1 date use SELECT to go to the interval start date
position. As needed, change the date for day one of the interval schedule with
ADJUST (can only be set up to 30 days out).
NOTE: Programming an INTERVAL schedule deletes any other schedule for
the selected program.
18
To Next Page
Loading...
Need help?
General
