Neolt Neofold HS 920 - Machine Operation; Using Special-1 Function

Chapter
USE
NEOFOLD HS
VERSION: NF.HS-07-03/2015-GB 6-4
Use of function special-1 6.1.5
The function special-1 enables to obtain folds different from the pre-set ones, keeping a
format of 420mm. of first fold. The format must be set before the first fold and it’s available
for the sizes A1 A0 and 2A0.
The special-1 modality works with the crossfold keys off.
297
305
 Press and keep pressed for more than 3 secs the key
210
.
 The display shows the following wording
A
3
, we can now configurate the
machine according to our needs.
 Press the key
in the area DIN824
DIN 824
20
88
to set the initial format,
the display shows the size, (A1-A0-2A0).
 Press the key
20
in the area DIN824
DIN 824
20
88
to move to the format
with edge setting with edge press always the same key to select the initial format (A1-
A0-2A0), using the keys
o to increase or decrease the edge value (20-
25-30) until when you obtain the desired measure.