INSTALLING THE PRODUCT
Safety
Danger to life due to fire or explosion
All electrical devices can cause fires despite careful construction. Flying debris from the fire or explosion may result
in death or severe injuries.
DO NOT install the product in environment with any flammable materials or gases.
DO NOT install the product in environment with any potentially explosive items or gases.
Risk of injury due to weight of product
Lifting the product incorrectly or dropping in transportation or mounting may result in injuries like bruises or muscle
strains.
Make sure to take the weight of product into account in transportation and lifting, and proceed carefully.
To avoid muscle strain or injury, please use proper lifting techniques and any necessary aid/tools.
Personal protective equipment MUST be worn suitably and properly for all work.
Risk of injury due to cables routed in wall
Drilling holes on a wall may damage power cables or pipes for gas or water routed inside.
Make sure to take cables or pipes into account before drilling.
Personal protective equipment MUST be worn suitably and properly for all work.
Risk of shortened product lifespan due to inappropriate installation environment
Installing the product in an inappropriate environment may risk shortening its lifespan. To ensure optimal
performance and operation, please:
DO NOT install the product in exposure to direct sunlight.
DO NOT install the product in exposure to rain and snow.
DO NOT install the product in exposure to splash of salt water.
Make sure the installation site meets ventilation requirement of the product.
The pollution degree of the external environment for NEP's inverters is PD3.
Pollution Degree 3 indicates:
Conductive pollution occurs, or dry, non-conductive pollution occurs which becomes conductive due to
condensation which is expected.
To Next Page
Loading...
