Need help?Do you have a question about the NEP BDM-800 and is the answer not in the manual?
General| Maximum Output Power | 800W |
|---|---|
| Continuous Power | 800W |
| USB Port | No |
| Output Voltage | 230V |
| Output Frequency | 60Hz |
| Protection Features | Over Temperature Protection |
User feedback and contact information for product support.
Compliance with NEC 2014, NEC 2017, and CEC 2015 regulations.
Guidance on reading the manual and understanding safety warnings.
Explanation of danger, attention, caution, and disposal labels used in the manual.
Critical warnings regarding installation, product modification, and electrical hazards.
Equipment tested and compliant with FCC Class B digital device limits.
List of essential NEP installation kit components for microinverters.
List of necessary external parts and tools for system installation.
Recommendation for installing surge protection due to lightning strike risks.
General steps involved in installing the BDM-800 Micro inverter System.
Instructions for mounting adapter plates and installing junction boxes.
Guidelines for mounting microinverters onto the PV racking system.
Steps for connecting microinverters to the trunk cable, sealing ends, disconnecting, and homerun setup.
Methods for grounding the BDM-800 system, via trunk cable or racking.
Sequence of actions to switch on and activate the microinverter system.
Methods for inputting serial numbers: manual, scanner, or web browser.
Process for creating an account for installers on the NEP website.
Process for homeowners to create an account on the NEP website.
Initial setup steps including gateway connection and serial number entry.
Guide to creating a new solar site profile on the NEP portal.
Steps to verify site creation and customize the module layout view.
Contacting NEP Support for gateway commissioning and site setup confirmation.
Optional step to provide homeowners access to the module view.
Explanation of LED indicators when the microinverter is in standby mode.
Explanation of LED indicators when the microinverter is producing power.
Indicator for a grounding fault and the error code system.
Interpreting LED light patterns to diagnose errors and faults.
Step-by-step guide to diagnose and fix an inoperable microinverter.
Safe procedures for disconnecting microinverters from PV modules.
Steps for securely mounting and connecting a replacement microinverter.
Detailed technical specifications for the BDM-800 microinverter.
Details on what the limited warranty covers and its validity period.
Explanation of NEP's actions for repair or replacement during the warranty period.
Instructions on how to obtain service and contact NEP for support.
List of conditions and damages not covered by the limited warranty.
To Next Page
