NEP BDM-600x - Product Parameters

Model  BDM-600 BDM-600X
Input | DC   
Recommended PV Module Power Range W 450 x 2 450 x 2
MPPT Voltage Range V 22-55 22-55
Startup Voltage V 16 16
Max. Input Voltage V 60 60
Max. Input Current A 18 x 2 18 x 2
Overvoltage Protection Category  II II
Output | AC   
Peak Output Power VA 580 650
Max. Continous Output Power VA 500 600
Rated Output Voltage V 230 230
Nominal Output Voltage Range V Configurable Configurable
Max. Continous Output Current A 2.17 2.4
Nominal Frequency / Range Hz 50 / Configurable 50 / Configurable
Power Factor (Nominal/Adjustable Range) 
0.99/0.8 leading…0.8
lagging
0.99/0.8 leading…0.8
lagging
AC Short Circuit Fault Current Over 3
cycles
Arms 4.4 4.4
THDi@Rated Power  <3% <3%
Max. Units per 20A Branch  6 7
Overvoltage Protection Category  III (AC Mains) III (AC Mains)
Efficiency   
Peak Efficiency  97.1% 97.1%
MPPT Efficiency  >99.5% >99.5%
Night Power Consumption mW 110 110
General Data   
Operating Ambient Temperature Range ℃ -40~65 -40~65
Relative Humidity Range  0-100% 0-100%
Dimensions (W x H x D) mm 277 x 132 x 50 277 x 132 x 50
Weight kg 2.9 2.9
DC Connector Type  MC4 MC4
AC Connection Type (inverter-inverter)  Daisy Chain AC Bus Daisy Chain AC Bus
Communication Method  PLC or WiFi PLC or WiFi
Protection Class  NEMA-6 / IP-66 / IP-67 NEMA-6 / IP-66 / IP-67
PRODUCT PARAMETERS