INFORMATION ON THIS DOCUMENT
Target Group
This document is intended for “Qualified Persons" and "End Users".
Tasks marked with a warning symbol and the caption “Qualified Persons” require associated skills to avoid and deal with
the dangers and risks in installing and using the product and tools described in this document.
Tasks not marked do not require particular qualifications and skill sets, and therefore can be performed by end users.
Qualified Persons
Qualified Persons required
Qualified persons are required to be familiar, understand and capable of following all applicable regulations, directives
and laws, and are aware of the potential risks to perform the activities marked in this document.
The following knowledge and skills are required for qualified persons:
Knowledge of how an inverter works and is operated
Knowledge of all applicable standards and directives, including country-specific grid conditions and regulatory
guidelines
Knowledge and training of how to minimize and deal with dangers and risks associated with using, installing, and
repairing electrical devices and installations
Knowledge and training in the installation and commissioning of electrical devices, especially those associated with
PV systems
Knowledge and training of and compliance with this document and all safety information
Knowledge of warranty terms and conditions associated with the product described in this document
"Qualified Person" means he/she is validly licensed from the local authority in:
Safely and properly installing electrical equipment and PV power systems
Safely and properly applying all applicable installation codes in practice
Properly analyzing and minimizing the hazards in performing electrical work and finished works for all persons
and properties involved
Properly selecting and using Personal Protective Equipment (PPE)
End Users
End users can be referred to any who intend to use the product described in these documents, and must avoid
performing tasks marked in this document with requirement for qualified persons.
End users should use this document for a comprehensive understanding of general features and functions involved in the
product, and as a guideline for performing tasks that do not require particular qualifications independently.
DO NOT put this product in use unless it has been successfully installed and commissioned by a qualified person
following described requirements and steps in the section of Installation and Commissioning as well as all applicable
laws and safety regulations.
To Next Page
Loading...
