Risk of injury and property damage due to inappropriate modifications or technical specifications
Modifications or alterations to the product and its connected system are not allowed unless with written permission
of NEP. Unauthorized modifications may cause incompliance with product's technical requirement (e.g. maximum
input voltage or current), that may result in moderate or minor injuries, and property damages.
Any guarantee and warranty claims in such cases will be voided.
Risk of injury due to hot enclosures
Touching parts of product enclosure that may get hot during operation (e.g. heatsink) and may result in burn
injuries.
DO NOT touch any parts other than the cover lid of the product.
Before working on the product, voltage resources MUST be disconnected, and leave the product to cool down
for 30 minutes.
Risk of injury due to weight of product
Lifting the product incorrectly or dropping in transportation or mounting may result in injuries like bruises or muscle
strains.
Make sure to take the weight of product into account in transportation and lifting, and proceed carefully.
To avoid muscle strain or injury, please use proper lifting techniques and any necessary aid/tools.
Personal protective equipment MUST be worn suitably and properly for all work.
Damage to product and property due to wrong output type
The product described in this document is designed to directly tie with and feed power into public utility power grid.
Connecting the product in any other forms of AC output source or equipment may result in product and property
damage.
DO NOT connect AC output of the product to any other sources than the utility grid, which will otherwise void
any guarantees and warranty claims.
Damage to product due to aggressive cleaning agents
For purpose of cleaning, using aggressive chemicals and cleaning agents may cause damage to the product and
components.
Use a wet cloth with clear water to clean the product.
To Next Page
Loading...
