6: Crimping Tool Manufacturers
To apply the Scotchlok™ connectors, Neptune requires
the use of a proper crimping tool. Table 2 shows a list
of various manufacturers and model numbers.
To reduce fatigue, use a tool within each
splicing group with the highest
mechanical advantage indicated within
the parentheses ( ).
Manufacturer Manufacturer’s Model
Number
3M
E-9R (10:1) — To reduce
fatigue, use a tool within each
splicing group with the
highest mechanical advantage
indicated within the
parentheses ( ).
E-9BM (10:1)
E-9C/CW (7:1)
E-9E (4:1)
E-9Y (3:1)
Eclipse Tools 100-008
Table 2: Proper Crimping Tools
Use of normal pliers or channel locks is
highly discouraged because they do not
apply even pressure and can result in an
improper connection.
- 12 -
To Next Page
Loading...
Need help?
General
