1: Product Description
The ProCoder™ is an electronic absolute encoder
register designed for use with the Neptune
®
Automatic Reading and Billing (ARB
®
) System. This
register operates with the Neptune R900
®
and R450™
Meter Interface Units (MIUs), providing advanced
features such as leak, tamper, and backflow detection.
With the ProCoder register, both the homeowner and
the utility can use the following features:
l Mechanical wheel bank for an absolute visual
reading
l Eight digits for billing
l
Sweep hand for extreme low flow detection and
directional water flow indication
Figure 1: ProCoder™ Dial Face with Sweep Hand
This guide helps you identify and read information
displayed on the ProCoder register. It also helps you
recognize the common causes of leaks and instructs
what to do if you find one. This guide contains steps to
determine whether a leak is fixed after repairs.
- 1 -
To Next Page
Loading...
Need help?
General
