Neptune ProCoder - How to Tell if Water Is in Use; Determining if Water in Use

9: How to Tell if Water is in Use
To determine if water is in use, complete the following
steps.
1. Look at the mechanical sweep hand.
2. Determine which of the following conditions exist.
If... Then...
The sweep hand is
moving slowly in a
clockwise direction
Water is running very
slowly
The sweep hand is
moving quickly
Water is running
The sweep hand is not
moving
Water is not running
The sweep hand is
moving counter-
clockwise
Backflow is occurring
Table 4: Determining if Water in Use
- 16 -