Neslab HX Series User Manual

- 5 -
Labels
Section II General InfSection II General Inf
Section II General InfSection II General Inf
Section II General Inf
ormationormation
ormationormation
ormation
DescriptionDescription
DescriptionDescription
Description
The HX Series Recirculating Chiller is designed to provide a continuous flow
of cooling fluid at a constant temperature and volume.
The unit consists of an air-cooled or water-cooled refrigeration system, a
fluid reservoir, a fluid recirculation pump, and a temperature controller.
HX units are available with a large number of options. This manual explains
how to install, operate, and maintain a “standard” HX unit. This manual also
explains some of the available options. Supplemental manuals are supplied
with units equipped with options not covered in this manual.
Throughout the manual, you will be asked to consult the unit’s serial number
label, or the pump identification label, or both, for specific information. Both
labels are located on the rear of the temperature control box.

Neslab HX Series Specifications

General

Pump Type	Centrifugal
Temperature Stability	±0.1°C
Fluid Compatibility	Water, water/glycol mixtures
Safety Features	Over-temperature protection
Display	LCD
Refrigerant	R-404A
Dimensions	Varies by model
Weight	Varies by model