D8x/D16x All Features
What's New in D8x/D16x Deluxe (v8)
card.
NESS RADIO INTERFACE for fully integrated wireless security.
TWO AREA PARTITIONING can split the panel into two independent
areas plus a common area.
REAL TIME CLOCK with AUTOTIME features - auto arm/disarm, auto aux outputs,
time based user control.
ACCESS CONTROLLER onboard with support for Weigand prox or fingerprint
readers.
INTERNET using Ness iComms/aComms iPhone/iPad and
Android apps and optional ethernet adapter.
ONBOARD VIBRATION SENSOR ANALYSER with programmable sensitivity. Use with
Nessensor™ vibration sensors.
MULTIPLE PROGRAMMABLE EOL resistor values from 0k to 22k (2k2 resistors
supplied).
DYNAMIC BATTERY TEST actively tests the battery under load every hour and
every time a keypad code is entered.
PROGRAMMABLE AUXILIARY outputs.
ENHANCED SERIAL DATA input/output via RS232.
AUTOMATIC RESET FUSES.
using Navigator keypad or NessComms™.
300baud mode.
transients.
DIALLER
OPTIONAL PRODUCT
Ness iComms
Ness aComms
Ness iComms and aComms apps
for mobile control of your D8x/ 16x
control panel from home, office,
anywhere in the world using your
iPhone/iPad or Android device.
■ ARM, DISARM
■ VIEW ZONE STATUS
■ EMERGENCY ALARMS
■ CONTROL THE PANEL OUTPUTS
(D8X/D16X V7.8+)
Requirements:
D8x/D16x V5.6 or later (V7.8 or later
to operate panel outputs).
Optional K-6002D Ethernet kit
(includes 101-244 Ethernet adapter &
450-246 RS232 cable).
iPhone/iPad/Smartphone not
included.
iComms and aComms are third party
apps which are endorsed by Ness
without tech support.
Emergency alarms must be enabled
in the control panel to be available in
iComms and aComms.
4
NESS D8X / D16X DELUXE CONTROL PANEL – INSTALLATION MANUAL