VOICE MESSAGE LIBRARY
D8x/D16x version 8.0 audible alarm messages and voice prompts for remote phone operation are drawn from this built-in library of
pre-recorded voice messages.
DESCRIPTION VOICE MESSAGE
ALARM MESSAGES
ZONE 1 to ZONE 16 Zone 1 alarm ... Zone 16 alarm.
Duress Duress EMERGENCY.
Keyswitch Panic Keyswitch panic emergency.
Keypad Panic Keypad panic emergency.
Radio Panic Radio panic emergency.
Medical alarm Medical EMERGENCY.
Fire alarm Fire EMERGENCY.
Exit installer Exit installer WARNING.
External Tamper External tamper warning.
Internal Tamper Security system Main Tamper WARNING.
Keypad Tamper Keypad tamper warning.
Radio Tamper Radio detector Tamper WARNING.
Mains Fail Mains power Fail WARNING.
Panel Bat Fail Security system main Battery Fail WARNING.
RADIO Bat Fail Radio battery fail warning.
RADIO Super Fail RADIO detector Supervision Fail WARNING.
ALARM INTRO This is a security system report. To start the report
press 1.
ALARM LOCATION Security SYSTEM reports the following:
ALARM CONCLUSION End of messages.
To control the security system press 2, then after the
tone, press 2 again.
To acknowledge and end, press STAR, then press
HASH, and then hang up the phone.
TELEPHONE REMOTE CONTROL MESSAGES
REMOTE CONTROL
ANSWER INTRO
This is your SECURITY SYSTEM.
REMOTE CONTROL
Entry Fail
Please try again. Press STAR, then enter your USER
code, then PRESS HASH.
CONTROL INTRO To arm or disarm the security system press 1.
To control OUTPUTS press 2.
To exclude or include a zone press 3.
To listen to reports press 4.
To hang up, press STAR then press HASH.
ARM & DISARM INTRO To arm, press 1.
To disarm, press 2.
To return, press STAR
ARMED 1 Area 1 armed
ARMED 2 Area 2 armed
DISARMED 1 Area 1 disarmed
DISARMED 2 Area 2 disarmed
DESCRIPTION VOICE MESSAGE
CONTROL OUTPUTS
INTRO
Double press the selected auxiliary output 1 to 8.
Then press STAR to activate or HASH to turn off the
selected output.
Press STAR to return.
AUX 1 ON Auxiliary 1 ON.
AUX 2 ON Auxiliary 2 ON.
AUX 3 ON Auxiliary 3 ON.
AUX 4 ON Auxiliary 4 ON.
AUX 5 ON Auxiliary 5 ON.
AUX 6 ON Auxiliary 6 ON.
AUX 7 ON Auxiliary 7 ON.
AUX 8 ON Auxiliary 8 ON.
AUX 1 OFF Auxiliary 1 OFF.
AUX 2 OFF Auxiliary 2 OFF.
AUX 3 OFF Auxiliary 3 OFF.
AUX 4 OFF Auxiliary 4 OFF.
AUX 5 OFF Auxiliary 5 OFF.
AUX 6 OFF Auxiliary 6 OFF.
AUX 7 OFF Auxiliary 7 OFF.
AUX 8 OFF Auxiliary 8 OFF.
EXCLUDE ALARMS
INTRO
To TOGGLE the zone EXCLUSION, enter the zone
number, then press HASH.
ACKNOWLEDGE Wait to hear the report again, or to continue, press 1.
LISTEN TO REPORTS
INTRO
To listen to the zone report, press 1.
To listen to the emergencies and warnings report,
press 2.
To listen to the AREA ARM report press 3.
To listen to the excluded zone report press four.
ZONE REPORT LIST The following zone alarms are current:
WARNING REPORT LIST The following EMERGENCIES and WARNINGS are
current:
EXCLUDE REPORT LIST The following zone exclusions are current:
RADIO DEVICE LOW
BATTERY
A radio device has a low battery and needs to be
changed.
EXTERNAL SIREN
TAMPER
The external siren cover has been tampered with.
PANEL ENCLOSURE
TAMPER
The security system main enclosure has been
tampered with.
All OK All OK.
INVALID Invalid entry.
RETURN PROMPT To return press HASH.
P198E
SYSTEM NAME
Available in D8x/D16x V8 and later.
PROGRAM MODE LEVEL
Installer mode or NessComms V5.3
or later.
FACTORY DEFAULT
11E on
NOTES
Only one option can be on. Turning
an option on turns off another.
Assign a name to the control panel to identify the system during an audible alarm message.
You can program a name from the choice below.
TO PROGRAM
1. Press P198E
2. Press 1E-11E to turn an option ON.
84
NESS D8X / D16X DELUXE CONTROL PANEL – INSTALLATION MANUAL
To Next Page
Loading...
