f. Browse to any of the URLs displayed.
Note: If possible, use the URL containing the IP address of the appliance's Admin
Network port.
Note: Accessing https://169.254.0.1:8443 requires a direct connection to the
local management port.
g. Confirm that the appliance is in maintenance mode by noting the maintenance mode
message on the StorageGRID Appliance Installer home page.
2. From the StorageGRID Appliance Installer, select Configure Networking > IP
Configuration.
3. Make the desired changes to the MTU settings for the Grid Network, Admin Network, and
Client Network.
Hardware Installation and Maintenance Guide for SG5700 Appliances 86
Maintaining the SG5700 appliance
To Next Page
Loading...
Need help?
General
