NetComm Wireless 4GM3W User Guide
MAC Control
MAC Control allows you to assign different access rights for different users and to assign a specific IP address to a specific MAC
address.
To enable MAC Address Control, select the Enable option at the top of the page.
Two types of MAC Control are available:
Connection control (C column)
Use this to control which clients (wired and wireless) can connect to the unit. If a client is denied access to connect to
this device, it means the client cannot access the Internet either. Choose to allow or deny clients with MAC addresses
that are not in the list to connect to this device.
Association control (A column)
Check Association Control to control which wireless client can associate with the unit. If a client is denied access to
associate with the unit, it means the client cannot send or receive any data via this device. Choose to allow or deny the
clients with MAC addresses that are not in the list to associate to the wireless LAN.
Note: Click the Next >> or the << Previous buttons to see the entire list
Click Save to save the settings or Undo to cancel.
To Next Page
Loading...
Need help?
Operating Environment
Power
Ports & Interfaces
Weight and Dimensions
