NetComm 4GM3W

www.netcommwireless.com
NetComm Wireless 4GM3W User Guide
9
Interfaces
BOTTOM PANEL
DESCRIPTION
1
Reset button
(not pictured)
By using a paper clip, hold this button down for more than 10 seconds to reset to factory
defaults.
REAR PANEL
DESCRIPTION
2 DC IN Power connector, connects to a DC 5V 2.0A Power Adapter
3 4G/WAN switch
Toggles the function of the Ethernet port between LAN and WAN mode.
Switch to 4G for LAN connection or to WAN for WAN connection
4 WPS
Hold this button down for 3 seconds and then release to enable the WPS push-button
connect function.
5 Ethernet port RJ45 LAN port for wired Ethernet clients (computers, laptops, etc)
2
3
4
5