NetComm Wireless 4GM3W User Guide
System Log
This enables you to set up the system log features of the router. You can also choose to send the system log to a remote syslog
server (via a UDP connection) or email a copy to a recipient.
IP Address for remote System Logs (syslog)
The IP address of the syslog server where the system log data will be sent. Click the "Enable" checkbox to
enable this function.
Email address to send syslog to
Click the “Enable” checkbox to enable this function.
Enter the IP address or fully qualified domain name (FQDN) and port for the selected email server.
The SMTP username required to send email
(if required)
.
SMTP Password The SMTP password required to send email
(if required)
.
Enter the email addresses to send a copy of the current syslog to.
Enter the email subject to show on any sent emails.
View the current system log.
Email the current syslog to the entered email addresses.
To Next Page
Loading...
